Electric Car Powered by Salt Water: 920 hp, 373 Miles/Tank

Electric Car Powered by Salt Water:

920 hp, 373 Miles/Tank

It’s finally here folks and it is LEGIT. Tesla eat your heart out, the Germans have created an electrical car powered by salt water. It has four electric engines and is FAST with some pretty sweet fuel economy for a sports car. Leave the Bugatti at home and stop by the beach to refuel.

 The recent announcement that the Quant e-Sportlimousine, which is a salt water powered car, has been certified for use on European roads is a big sign that the Oil Cartels are losing the energy war.

Since the early 1900s, the Oil Cartels, which are controlled by the Controllers, have been harassing and silencing alternative energy inventors who pose a threat to the Oil Cartels. One of the greatest alternative energy inventors that they silenced was Nikola Tesla.

Unlike traditional cars that run on gasoline, the Quant e-Sportlimousine runs on an electrolyte flow cell power system made by NanoFlowcell that has the ability to generate an astonishing 920 horsepower (680 kW).

This salt water powered car can go from 0-62 mph (100 km/h) in 2.8 seconds and has a top speed of 217.5 mph (350 km/h). The Quant e-Sportlimousine is built by the German company Quant.

Electrolyte flow cell technology has been around for decades, but it wasn’t until recently that certain car manufacturers were given the permission to start building cars that run on electrolyte flow cell technology.

This type of alternative energy technology will eventually make gasoline powered cars obsolete, because using electrolyte flow cell technology to power cars is a lot more efficient and much cleaner than using gasoline.

As described by The Mind Unleashed:

“The car is powered by the electrolyte flow cell power system, which is a part of the NanoFlowcell technology. The system works in a similar way to a hydrogen fuel cell, except for the fact that salt water is used for storing power.

“In particular, two liquids with metallic salts, which act as the electrolyte, are combined in such a way that the electrochemical reaction takes place. After that, electric motors use this reaction to generate electricity, which is then stored and distributed by super capacitors.

“The efficiency of this system reaches 80%, since the car has almost no moving parts in it, and the produced waste heat is insignificant in comparison with cars powered by lithium-ion batteries.”

Alternative energy technologies, such as the electrolyte flow cell system, will become more mainstream as the new paradigm emerges. These types of alternative energy technologies will help solve our “energy crisis” and usher a new age in which we can live without worrying about not having access to cheap and clean energy.

QUANT e-Sportlimousine with nanoFLOWCELL® drive

General Electric has been working on flow battery technology for years and announced in August 2013 that it aimed to power a car with a water-based battery for 240 miles, though there is no word on whether much progress has been made there. Flow cell batteries have the potential to power cars three times as far and for one-fourth the cost of lithium-ion batteries (the sort that industry darling Tesla Motors is betting big on), according to GE. Flow cell batteries are said to be safer, lighter, and easier to recharge than lithium-ion ones, as well.

We now have a clearer picture of Nunzio La Vecchia’s energy and supercar ventures than we did when we covered the Quant teaser. La Vecchia began researching alternative energy technologies in 1991, forming NLV Solar in Switzerland seven years later. He turned his attention to auto design in 2003, partnering with Koenigsegg on the original Quant in 2009 and releasing an updated version on his own a year later. Nanoflowcell emphasizes that the cooperation with Koenigsegg ended in 2009, and the 2014 Quant represents an entirely new vehicle concept.

“Following the 2010 Geneva Motor Show, it was decided to pursue a completely new concept, both optically and technically,” Nanoflowcell explains. “Every element of the Quant e-Sportlimousine has been developed from the ground up over the last four years: new powertrain, complete redesign, and most importantly, every aspect of the new prototypes are designed with homologation requirements in mind.”

The beating heart of the new Quant is its Nanoflowcell power storage, a very specific formulation of flow battery. Flow battery power for vehicle use is being researched elsewhere, as well, but the Quant becomes what Nanoflowcell qualifies as the first actual vehicle powered by it.

Nanoflowcell explains that its technology boasts five to six times the storage capacity of other flow cell designs or lithium-ion batteries, making it primed for vehicular use. It credits that superior energy density to “an extremely high concentration of ionic charge carriers in the cell system’s electrolyte” and translates it into a 249- to 373-mile (400- to 600-km) driving range estimate.

Understandably, Nanoflowcell isn’t divulging the full recipe for its flow battery or electrolytes. In its introductory video, it describes the solutions simply as salt water. La Vecchia confirmed that the full truth is a bit more complex, as the electrolytes contain a mix of metal salts and other ingredients.

The high- and low-charge solutions are stored in separate 200-liter tanks in the rear of the Quant, being pumped forward through a central cell, separated from each other by a thin membrane. This creates electricity, which flows into two supercapacitors, where it is stored and managed, released on acceleration to power the four three-phase wheel motors. Nanoflowcell says the flow technology operates with 80 percent internal efficiency.


In development for 14 years, the four-seated car measures roughly 5.25 metres in length and sports what its creators say is an entirely new kind of energy storage system, also called Nanoflowcell. The company claims that the automobile is capable of speeds of 350 kilometres per hour and acceleration of 0-100 kilometres per hour in just 2.8 seconds, and can travel distances of 600 kilometres with a full tank of a petrol made from a salt water solution.

An electrochemical reaction is created by combining two liquids with metallic salts acting as the electrolyte. These solutions are pumped through a fuel cell where an anode or cathode electrode is located, creating electricity that is then forwarded to super capacitors within the car.

Compared to conventional technologies, one litre of the salty liquid contains 400 times more energy than a typical lead-acid battery, and the prototype car carries two 200-litre tanks on board, the company states.

The Quant e-Sportlimousine concept made its initial debut at the Geneva Motorshow 2014, where it was met with some scepticism by critics. A separate Quant car had appeared at the same show in 2009 but never made it to market.

However, the news that the vehicle has been deemed safe for public roads has prompted renewed interest in the prototype.

According to Nanoflowcell’s Nunzio La Vecchia, the firm has partnered with German electronics company Bosch Engineering GmbH to further develop the technology, and it hopes to release four more prototypes throughout 2014.

“Transforming an initial prototype into a series-production vehicle that can be used around the world is a big challenge,” La Vecchia said in an interview. “We are certain that we can manage it with this established and experienced partner.”

La Vecchia said in a statement that the approval from TÜV Süd marks a “milestone” not just for the prototype, but potentially for mobility in general.

“For the first time an automobile featuring flow-cell electric drive will appear on Germany’s roads,” he said. “We are extremely proud that as a small company we have developed such visionary technology and are now able to put it into practice. But this is only the beginning of our journey of discovery.”

He added that investors and auto manufacturers showed “tremendous interest” in the e-Sportlimousine, and that the firm is now working at “top speed” on certifying the vehicle for series production.

The future of driving is the subject of the Dezeen and MINI Frontiers exhibition during this week’s London Design Festival. The exhibition at designjunction, 21-23 New Oxford Street, London WC1A 1BA, will run from 17 to 21 September and showcase six proposals for transport by emerging designers.

From Aetherforce @ http://aetherforce.com/electric-car-powered-by-salt-water-920-hp-373-milestank/

For more information about alternative fuels see http://nexusilluminati.blogspot.com/search/label/alternative%20fuel  

- Scroll down through ‘Older Posts’ at the end of each section

Hope you like this not for profit site -

It takes hours of work every day by a genuinely incapacitated invalid to maintain, write, edit, research, illustrate and publish this website from a tiny cabin in a remote forest

Like what you see? Please give anything you can -  

Contribute any amount and receive at least one New Illuminati eBook!

(You can use a card securely if you don’t use Paypal)

Please click below -

Spare Bitcoin change?

Videos -  https://youtu.be/RqLpqR0SPnQ

https://youtu.be/6LIYQ4Yp9bg

For further enlightening information enter a word or phrase into the random synchronistic search box @ the top left of http://nexusilluminati.blogspot.com

And see

 New Illuminati – http://nexusilluminati.blogspot.com

 New Illuminati on Facebook - https://www.facebook.com/the.new.illuminati

New Illuminati Youtube Channel -  https://www.youtube.com/user/newilluminati/playlists

New Illuminati’s OWN Youtube Videos -  

https://www.youtube.com/user/new1lluminati/videos

New Illuminati on Google+ @ For New Illuminati posts - https://plus.google.com/u/0/+RamAyana0/posts

and see https://plus.google.com/115562482213600937809/posts

and google.com/+newilluminati-channel

New Illuminati on Twitter @ www.twitter.com/new_illuminati

New Illuminati on Google Follow - http://www.google.com/friendconnect/settings/edit?smpl=true&st=e%3DAOG8GaCFDeBRZ1yDY2DjCaq61tFDiwO07s%252Fwv3x8%252B%252FJgZJTLx5igbMomJIu3796Ja6n05WaS8qnJ0DLyeGk1q49tLD8m%252FhV1K%252Bq%252BQIOGOwLeWznnm5IGhzjfWzVnq5I4UJr3fw8yk%252B8W2OqwlCbL7BNsW32uouSc79Br%252BkOZQ1Fpzg6J3KMIZkzmg0%252FcPHsWUPqZv845VKS31S%252FbCm8NpINhlK1kDxUdRmcCkT37dIc4RB6PNurjCcd2%252BVkNBveCm4kAgeb8A3Q5hNj6%252FHplvQxKFI%252BW1TYBJVYqHHTKsnBPGcL6wlZdxTUwtfxWU2ZvANJQ%252F%252FUrolBwP7ovb92SZqSWMFJRnN2rsQ%253D%253D%26c%3Dpeoplesense

New Illuminations –Art(icles) by R. Ayana @ http://newilluminations.blogspot.com

The Her(m)etic Hermit - http://hermetic.blog.com

DISGRUNTLED SITE ADMINS PLEASE NOTE –

We provide a live link to your original material on your site (and links via social networking services) - which raises your ranking on search engines and helps spread your info further!

This site is published under Creative Commons (Attribution) CopyRIGHT (unless an individual article or other item is declared otherwise by the copyright holder). Reproduction for non-profit use is permitted & encouraged - if you give attribution to the work & author and include all links in the original (along with this or a similar notice).

Feel free to make non-commercial hard (printed) or software copies or mirror sites - you never know how long something will stay glued to the web – but remember attribution!

If you like what you see, please send a donation (no amount is too small or too large) or leave a comment – and thanks for reading this far…

Live long and prosper! Together we can create the best of all possible worlds…

From the New Illuminati – http://nexusilluminati.blogspot.com

The Future of Clean Energy and Overunity Explained

The Future of Clean Energy and Overunity Explained

by Matt Imber

When I first began working professionally on R&D and the prospects of commercailization of emerging clean energy technology to facilitate a goal from my boss, co-owner of over 700 buildings slated to go off the grid using onsite, off-grid power generation for use in small businesses he owns (most of which are restaurants), I soon found that we both agree that although solar and wind energy generation technologies are vital components of the clean alternative energy market, these only provide a relatively small amount of power, and are not practical for use in typical small or medium sized businesses, or even for most residential needs.  

Not only are solar PV panels and wind turbines impractical for use in urban settings (and costly), they simply don’t provide nearly enough power to run a small business with, even if enough roof space or other property space is available for the energy generation equipment.  Moreover, the payback period for a 10 kilowatt (kW) off-grid solar PV energy system can be 7 years or more, further impeding its development.  Supplying one’s own clean power using solar or wind has simply been cost prohibitive, despite its environmental benefits or tax incentives to invest in it.

In light of this, many businesses wishing to “go green” electrically will opt out of the supply side and instead address the demand side of the energy ledger, simply because it is something within their control and cost parameters to do.  Typically this is done by implementing an energy reduction plan.  Reducing energy costs by replacing old, inefficient HVAC equipment with high efficiency units, switching to efficient lighting, reducing or eliminating wasteful electrical loads,  increasing insulation and switching large loads to off-peak hours, etc. can afford substantial savings in energy costs, as high as 25% in some cases.  But again, the payback period for this kind of investment into energy reduction can be long and it does not address the larger portion of energy costs – the supply side. 

What is desperately needed is an unconventional energy generation device that is safe, affordable, and reliable and can supply the entire energy load demanded by any given building, while using minimal space to do this.  Ideally, this generator would provide its own renewable source of fuel to power itself, and not be environmentally destructive (emitting no greenhouse gasses or other forms of pollution). 

Ideally, the upfront capital costs of this generator would be realized within a 2 year period, by offsetting electrical energy costs that are no longer paid to the retail electric provider (REP), or electric utility.   A much shorter duration for a return on investment can be realized if a substantial portion of energy can be sold back to the electrical grid using net metering.

While this “green machine” may seem by many to be decades away from development, it may come as a surprise that many inventions over the past century, and particularly the past 2 decades, have already been developed and have proven their claims of providing clean, free energy and fit all of the above stated criteria.  Some notable examples of such devices include the Edwin V. Gray Motor, the John Bedini Motor, the Joseph Newman Motor, the Stanley Meyer Water Fuel Cell, and more recently, Randell Mills’ Blacklight Power Process.  Many other inventors who have purportedly developed similar devices can be found here: http://peswiki.com/energy/Directory:Inventors#Inventors

There are many reasons that have kept most of these devices from being commercially available, and some of these reasons are controversial in nature and debatable.  However, the validity of many of these over-unity (OU) devices is no longer debatable and should not be overlooked, especially with worsening global economic and environmental crises.  It is imperative that in order to bring to the market an efficient non-polluting alternative energy supply that we look into unconventional and “new” technologies, so that this science is brought forward commercially quickly, and lessens the impending energy crisis and the environmental harm the current conventional energy supply model creates.  The need to go beyond solar and wind is real and growing in its urgency daily.  A vast opportunity now exists in the decentralized, distributed power generation market.  This opportunity can be seized upon by many in the public & private sector using the right breakthrough technology.

Originally, this report was not intended to explain any net gain in energy from any given device, but mainly to show some possibilities to achieve a net electrical energy gain by combining two or more related energy products.  But it is evident that in order to succeed in the “free energy” field -- whether it’s from an investment standpoint or as a manufacturer or developer of such an exotic energy product -- an explanation of the originating energy source is needed. 

There is simply too much resistance to a majority of the technology revealed in this report from the general public, academia & engineering field to let this subject go unexplained.   As the saying goes, “you can’t get something from nothing.”  Or, to quote a famous line from Star Trek:  “I can’t change the laws of physics!”  Maybe you can’t change or break the laws of physics, but perhaps there are loopholes (exceptions) to these laws that explain such energy devices’ abilities to produce more power that what was put into them.

The cold, hard fact is that the laws of physics are now being rewritten as new information is known and confirmed from the academic world of quantum physics.  It has only been recently confirmed (mid 2000’s) that about 70% the observable universe is composed of dark energy.  Source: http://www.nasa.gov/missions/deepspace/f_dark-energy.html  and
http://www.jhu.edu/news_info/news/home07/jul07/gruber.html . 

Unlike gravity, dark energy is a repulsive force that is quickening the expansion of the entire universe by creating more empty space, and driving galaxies away from each other.  See also: http://www.youtube.com/watch?v=UtbGPcElW4g&eurl=http://peswiki.com/index.php/Directory:Galactic_Sea_of_Energy

What exactly is dark energy, and what does this have to do with the energy products in this report?  Dark energy is not yet fully understood because it can not be directly measured, even though it exists in the space between the stars as well as the space between the atoms in our bodies and all matter in the universe.  (See also: http://en.wikipedia.org/wiki/Dark_energy ). 

Although one cannot yet directly measure dark energy, the effects of dark energy on matter and light are what can be measured.  Dark energy (not to be confused with dark matter), may in fact be the same exact thing as Zero-Point Energy (ZPE), which is a huge energy source that behaves in an opposite fashion to electrical energy.  It is called zero-point energy because of the fact that if you chill down any matter to near absolute zero (0 degrees Kelvin), you still have a measurable movement within the matter at the atomic or molecular level, and therefore energy  (See  http://en.wikipedia.org/wiki/Absolute_zero ).  Liquid helium remains a liquid near absolute zero because of zero-point energy (dark energy).  ZPE has been around since the beginning of time, and will be around in colossal abundance, until the end of time.

Zero-Point Energy (or ZPE) is a highly dynamic, constantly fluctuating maelstrom of positrons (antimatter) and similar antiparticles that constantly come into, and out of existence, much like bubbles under a waterfall, constantly forming, popping and forming again. (See: http://www.qveng.com/primer.html  and http://www.cheniere.org/correspondence/012202a.htm ).  ZPE is, in essence, the energy of the vacuum, or the energy from nothing.  Theoretically, at the quantum level, zero-point energy is rapidly fluctuating and constantly changing.  At the universal macro level, ZPE is relatively constant & evenly distributed.  While this is a difficult concept to grasp, it remains a scientific fact.  The amount of ZPE is staggering; “Today we know that one cubic centimeter of pure vacuum contains enough energy to condense into 1080 – 10120 grams of matter!” (See: http://www.cheniere.org/books/excalibur/moray.htm ).

What is also a well known fact is a simplified statement of basic thermodynamics, which states: energy can not be created nor destroyed; only converted from one form of energy into another.  So, when you take into account the energy that artificially goes into a device, and compare this input energy against the output energy, plus any wasted heat energy the device puts out, the total amount will always equal out (energy in will equal energy out).  One form of energy is converted into other forms, but the two compared will even out. 

For example, a small motor that takes in 25 watts of electrical energy to drive a fan will convert some of the input electrical energy into mechanical energy to move the fan blade, and some will get converted into heat, which is not used for the work of the motor and wasted.  If you add up the mechanical torque energy & the heat energy that is created from the motor, plus any additional energy (in whatever form) that is a result of the motor’s operation, it will equal the amount of the energy which was supplied artificially to the motor.  The word “artificially” is stressed here because this becomes a critical part of understanding the efficiency of an electrical device or energy product.  It is also critical to understanding how zero point energy explains the excess energy gain in many of the energy products in this report. 

The fact that most forms of energy can be mathematically converted into a thermal (heat) value is also important to note when considering the efficiency of any given energy product (See: http://en.wikipedia.org/wiki/Thermal_efficiency ).  You divide the total output of energy produced by the device by the total amount of energy put into the device artificially.  In other words, you divide what you get by what you paid for in order to achieve this efficiency rating.  Thermal efficiency is typically used to measure efficiencies of devices that generate heat, either as a primarily output, or as a waste or byproduct.  Common examples include internal combustion engines and electric or gas heaters.  Since any measurable energy source (such as wattage or horsepower) can be converted mathematically into a heat value (BTU), the thermal efficiency can be applied to any mechanical energy device. 

The most common of this measurement is known as Coefficient of Performance, or COP efficiency.  It is defined by Tom Bearden as:  “the total useful output (energy or work) divided by only that energy input that the operator furnishes.”   It specifically does not consider any extra energy the active environment may input.  (See: http://www.icekubesystems.com/pdf/COP.htm ). 

A simpler and much more important method of measuring a mechanical device’s efficiency can be called the Overall Efficiency, which is Tom Bearden defines as: “the total useful output (energy or work) divided by the total energy input.” THIS method of efficiency measurement takes into account the input energy that comes from both artificial means and natural/environmental means. (See: http://www.cheniere.org/correspondence/071403a.html ).  COP efficiency can easily include naturally occurring forms of energy into the equation, such as wind or solar energy inputs, but a COP rating typically leaves these energy sources out of the equation altogether.  In most cases, the natural forms of input energy are not considered in COP efficiency at all.  This usually results in efficiency ratings of electrical motors and most mechanical/energy devices to have a COP efficiency of less than 1.0.  Going over 1.0 would mean going over 100% efficient, which would violate the first law of the conservation of energy.  A common misperception is that a mechanical energy device can never exceed a COP efficiency value of 1.0 (1.0 = 100%).  But this is not true even when you consider a refrigerator, or a heat pump.  The COP rating is applied to refrigerators or heaters because the efficiencies of these devices often exceed 100%.  (See: http://en.wikipedia.org/wiki/Thermal_efficiency#Heat_pumps_and_refrigerators .  For a more detailed explanation with drawings, please see: http://hyperphysics.phy-astr.gsu.edu/Hbase/thermo/heatpump.html .

The few previous links above are helpful to understand the various means to rate a mechanical and electrical device’s efficiency, but this subject becomes very confusing because of the many formulas and ways to rate efficiencies, depending on the device being measured.  Tom Bearden’s approach simplifies this with a simple formula that works for any mechanical and electrical device.  The simple formula involves dividing the energy outputted from a device to do the intended work by the total amount of that went into the device – whether by artificial or natural means; or, energy paid for by the operator of the device, or that comes from the natural environment.  This method specifically takes into account naturally occurring forms of energy like wind, solar or ZPE as the input energy into the device.   Moreover, the Bearden formula can be applied to any electrical and mechanical device, which makes this formula applicable to motors, alternators, IC engines, heaters, etc.  See: http://www.cheniere.org/correspondence/071403a.html .

By applying the simple Bearden COP formula, you can have a device which may be 60% efficient (relative to its thermal efficiency and ability to convert electricity in torque or heat), and make the overall COP efficiency of the device greater than 1.0, making it over 100% efficient, or infinitely efficient, depending on the free energy source.  This does not violate thermodynamic laws of conservation.  This is because there are several free energy sources that are available to all, and some of these energy sources are infinite in their availability. 

Consider a large waterfall, or a manmade dam.  As long as the water supply is there to fill the river, streams or lake, there will always be a constant potential for hydroelectric electric power.  There is only an initial investment into the generator, and occasional maintenance costs to consider, but these costs are negligible when considering the continuous and indefinite energy supplied by using hydroelectric power.  If one’s home electrical power was entirely supplied by a generator driven by a river or stream on the property, every electrical device in the home can be considered to be infinitely efficient.  

 

 

The same idea can be applied to solar power and wind power, but these power sources differ from hydroelectric power in two important ways;  Solar power, although available everywhere the sun is shining, is a relatively more costly free energy source than hydroelectric in terms of its initial investment costs. 

Solar power (whether photovoltaic, or solar/thermal) is also intermittent, whereas hydroelectric power is essentially an infinitely free energy source.  Wind power is also a free environmental energy source, but is even more intermittent compared to solar, and is less efficient in the way it typically converts the wind into electrical power.  Wind power has an advantage over solar power in that it is cheaper on its relative investment cost, and is available day or night.  Wind and solar power have advantages over hydroelectric in that they are available almost anywhere on the planet’s surface, where hydroelectric power is very geographically dependent.  99.9% of the population doesn’t have access to a running river or stream, but do have access to wind and solar energy.

Both wind and solar power have a perceived disadvantage over hydroelectric power, in that their power must either be used once generated, or stored if not used to power a load.  But in actuality, any electrical power -- including hydroelectric -- must be used as it’s produced, otherwise it must be stored or go to waste.  Solar PV power is typically stored before being used.   This is because solar photovoltaic (PV) cells convert light (photonic) energy from the sun directly into direct current (DC) electricity.  Since most electrical devices are powered to run on utility-provided AC power, the DC power from a solar PV cell must first be converted into AC power before consumed.  Solar PV power is ideal for storage, because it is already in the only known form that can be stored electrically; in DC (direct current).  

The DC power from solar cells are typically sent directly into a bank of lead-acid chemical batteries, and then the stored energy in the battery bank is converted (inverted) into AC (alternating current) via an inverter circuit, to supply power to a building or other AC load.  Wind power output can be in either AC or DC.  If a wind turbine produces AC power, it’s produced with an onboard alternator which is turned by the wind and sends the varying AC power to a rectifier circuit, which converts the alternating current into direct current (DC).  The DC power is then sent to a battery bank, where it can accumulate (charge up the batteries).  From the battery bank, the power is then inverted back into AC, so that it may power most electrical loads.

If you were to use a small scale example such as a home or small business that used as much wind and solar energy as it could on a half acre lot, you could generate a constant average of 10 kilowatts or more using conventional PV cells and wind turbines.  This would be enough to power the home or business, plus perhaps provide an excess amount of energy in some cases that can be sold back to the electrical energy grid.  More importantly, you can apply the Tom Bearden’s COP efficiency formula to your entire energy load and be consider every electrical device in the load to be infinitely (over 100%) efficient.  

There’s just one main catch; the investment costs that went into the installation of the solar PV panels, wind turbines and the electrical storage and related equipment.   The cost for this could be as high as $30,000.  This initial investment cost must first be realized through electrical energy savings (money not paid to the utilities, combined with any money paid back by the utility for supplying the solar & wind power back to the grid).  If the property in question was previously consuming 10kW on a constant basis, it would consume about 7,200 kWh per month.  At the average U.S. electrical energy market rate (~$0.15/kWh), the annual cost for such electrical consumption would be around $86,400.  It would take about 3 years to realize a return on the $30,000 investment of the solar and wind power.  After the 3 years, however, the building’s electrical load is being supplied by free energy, and the COP efficiency of this load can be considered infinite (over 100%). 

There are other drawbacks to consider;  the building may still be using natural gas for heating and/or cooking, and these utility costs are substantial – especially natural gas, or petroleum-based heating.  You may be running all of the electrical devices for free, but any gas powered energy units -- especially a natural gas-powered heater -- must be considered.  Another important drawback to consider of such a solar and/or wind generation system is the unpleasant aesthetics of the solar panels and wind turbines.  The solar panels alone would occupy almost every square inch of roof space.  The wind turbine(s) would require a 40 foot mast or higher structure to access proper wind velocity for optimal generation, and although wind turbines are not loud, they are not entirely quiet and can be a source of complaint -- especially in an urban area.  

Wind turbines also pose a slight risk to nearby structures during excessively high winds during a storm and can cause bodily harm or property damage if the turbine is damaged from excessive wind speeds such as a tornado or hurricane.  Because of these drawbacks, wind and solar power are not a practical energy source for most small businesses or for most urban residents and homeowners. 

Nonetheless, many people in rural areas and urban settings still access these energy sources, and obtain energy for free, even if they continue to pay other utilities for energy needs.  When you generate electricity from the sun, water or wind, you are harnessing free energy and using it for work, regardless of if you are purchasing energy elsewhere.  The main limitations to the mass public & private harnessing of wind & solar energy have been the cost factors and physical limitations that come with these energy sources.   

What if there was a way to harness other natural energy sources that are available to everyone, regardless of location or the time of day?  Gravity is one such endless natural energy source, but free energy devices using gravity as the sole energy source have been elusive.  One inventor uses gravity combined with floatation to generate a small amount of free energy (see: http://www.youtube.com/watch?v=gxnHJoyrQpM&feature=channel_page .  The electromagnetic (EM) energy from the Earth’s core is another potential source of endless energy for all.  (See: http://en.wikipedia.org/wiki/Earth's_magnetic_field )  It is continuously available as long as Earth’s core is in motion.  Perception from academia on this issue has been that the Earth’s magnetic field is relatively too weak to draw a substantial amount of electrical energy from it, and that an enormous collector would be necessary to harness Earth’s natural magnetic field, being generated from the planet’s core.  Still, inventors such as the famous Nicola Tesla and Thomas Henry Moray have experimented in this field and not only theorized about harnessing such an energy source, but have constructed such a device (see: http://www.free-energy-info.co.uk/Chapter7.pdf ).

Regardless of what form it manifests itself in, it remains a strong possibility (or probability) that an abundant energy source is available to harness at any location on Earth, and available indefinitely day or night.  The possibility exists right now to have the equivalent of the power of Hoover Dam in every back yard, or utility closet on the planet.  The trick is how to tap into the energy source of Zero-Point Energy and convert it into usable electricity.  Dr. Tom Valone speaks in detail about the prospect of harnessing Zero-Point Energy and how it has been done here: http://www.pureenergysystems.com/events/conferences/2004/teslatech_SLC/TomValone/ZPE_Extraction_QuantumVacuum.htm .  A video presentation of Dr. Valone describing ZPE and its harnessing can be seen here: http://video.google.com/videoplay?docid=-6286598798176714592 .  Moray King describes in great detail exactly how ZPE is tapped using a Water Fuel Cell (see: http://www.youtube.com/watch?v=kGx_o7IuNy4&feature=channel_page) . 

One vital step to the commercialization of free energy products which harness Zero-Point Energy is mass public awareness of the energy source, and the knowledge that this source is available everywhere and anytime, day or night.  Awareness throughout academia and the established engineering field of this energy source is also critical for the technology to move forward commercially.  What can also help drive this forward is to have a commercially available ZPE product to the public that can harness ZPE and convert this into a usable source of energy in large amounts, whether it’s used to move a car, or to provide electricity to power a home.  Once such a product is mass produced and in the mass market, it can no longer be ignored simply because of its commercial success. 

This report has several such emerging and promising energy products as the backbone of each conceptual generation design.  In many cases, a ZPE device is combined with a highly efficient energy product that utilizes conventional means to convert the captured ZPE into electrical energy. There are endless possibilities and combinations of energy products that may achieve an end product that realizes a seemingly net gain in energy. 

But it must be stressed, however, that once the ZPE enters any of these devices, the energy is conserved and follows all the rules of thermodynamics and the laws of conservation of energy.  Zero-Point energy is NOT conserved, and its physics behave differently than conventional forms of energy.  Once it is harnessed and brought into the energy system as a usable form of energy, it is conserved.  To some, this may be a subtle fact, but it is key to help explain the net energy gain of the energy product prototypes depicted in this report. 

Each option can be compared wind and solar energy systems in that they tap into a natural energy source and use this to do work, and provide a way to use free energy.  The natural dynamics and physics of ZPE is much different than wind or solar energy, and this difference should be known in order to explain where the excess energy is coming from.  Just as wind and solar energy generation systems owe their “excess” of energy to the wind and sun, any generator having over-unity properties that taps into ZPE must owe its energy source to the Quantum Vacuum Flux Field (ZPE field). 

 

 

When you compare each overunity/free energy option to the hypothetical $30,000 solar & wind energy system described earlier, you may see an apparent difference between the two, aside from the originating energy source.  The difference would be that each option appears to be a closed loop system, whereby the energy that is outputted from the device goes back to power the system, essentially running itself.  Many would call this a perpetual motion device, and therefore be impossible.  This analogy is false.  Firstly, perpetual motion implies something will move forever – which would be impossible.  Over time, bearings wear down, maintenance is required and nothing can move forever.  Secondly, each product may feed back heat or electrical energy back to the ZPE device, which is the primary power source, but this device (such as a Water Fuel Cell) is still drawing energy from nature’s ZPE field, even though the electricity it uses to operate might be coming from the energy the unit is producing.  It may look closed loop, but it is not. 

When considering the energy flowing into the ZPE device from nature, it becomes clear that it is on open loop system, analogous to a water wheel, or large solar panel array.  It’s just a much more different and much more abundant energy source.  It may not be a perpetual motion device, but it may be considered a perpetual energy device when it is in operation.  It’s perhaps more accurate to just call it a free energy device.


From https://www.facebook.com/notes/orenblau-blau/the-future-of-clean-energy-and-overunity-explained-using-quantum-physics-by-matt/2333601172892

For more information about overunity/free energy devices and theories see http://nexusilluminati.blogspot.com/search/label/free%20energy
 

Help This Unique Independent Site Survive

Donate any amount and receive at least one New Illuminati eBook!

Just press the button -

Images –http://www.pureenergysystems.com/news/Examiner/Rasa_free_energy_320.jpg
http://yowusa.com/radio/cttc/2005/cttc-0305-34/CTTC1Q0506_inventors.jpg
http://www.adamite.com/wp-content/uploads/2011/03/Tesla-coil-300x266.jpg
http://www.energyrant.com/wp-content/uploads/2009/04/sustainable-wind-farms.jpg
http://modesolarpanelstasmania.com.au/wp-content/uploads/2011/10/Solar-Power-Systems.jpg
http://www.ushinternational.com/thumbnails/flashmo_217_v_shape.jpg
http://www.ufowijzer.nl/fotos/Energie/Yildiz2.jpg
http://www.free-energy-info.co.uk/Ch13/Fig8.gif

For further enlightening information enter a word or phrase into the search box @  New Illuminati or click on any label/tag at the bottom of the page @  http://nexusilluminati.blogspot.com

And see

 New Illuminati – http://nexusilluminati.blogspot.com

 New Illuminati on Facebook - https://www.facebook.com/the.new.illuminati

New Illuminati Youtube Channel - http://www.youtube.com/user/newilluminati/feed

The Her(m)etic Hermit - http://hermetic.blog.com

The Prince of Centraxis - http://centraxis.blogspot.com (Be Aware! This link leads to implicate & xplicit concepts & images!)

This site is published under Creative Commons Fair Use Copyright (unless an individual item is declared otherwise by copyright holder) – reproduction for non-profit use is permitted & encouraged, if you give attribution to the work & author - and please include a (preferably active) link to the original along with this notice. Feel free to make non-commercial hard (printed) or software copies or mirror sites - you never know how long something will stay glued to the web – but remember attribution! If you like what you see, please send a small but heartfelt donation or leave a comment – and thanks for reading this far…

Live long and prosper!

From the New Illuminati – http://nexusilluminati.blogspot.com