South African Fuel-Free Generator Preparing for Market

South African Fuel-Free Generator Preparing for Market

by Sterling D. Allan

Sterling Allan reports on his recent trip to South Africa to visit a company who has developed a 5 kilowatt Fuel Free Generator that will be available beginning March for their existing customers. Sterling will be getting a generator to test and use on his home from that first batch of 200.

On February 11 and 12, I was able to witness a 5 kilowatt (enough to power a home without central air conditioning, conservatively) fuel-free generator in Johannesburg and to meet the inventor and some of the principle players in helping him bring this technology to market.

As mentioned in my previous story on this matter, the South African company invited me to come see the technology first-hand so that I would not be making a statement along the lines of "they claim...", or "if this is real...", but so that I would be able to speak from personal experience after witnessing the technology in operation. They also offered to sell me a unit that I could personally test, promising to refund the cost if it did not perform as claimed.

I wish to thank all of you who stepped forward enthusiastically to donate funds to make this trip and procurement possible. The plan is to ship me one of the first 200 units.

The company, for now, wishes to remain off the radar. They don't currently have a website, but one is expected to be completed in about a month or so. They plan to make a big splash soon. For now, interested parties (as a result of this coverage), can reach them through me. So in this coverage, I will only refer to them as the "S. African Company", and their product as the "FFG", which stands for Fuel-Free Generator.

Top Five

I do consider this technology to be a contender in our Top 5 Exotic Free Energy Technologies listing, due to its being close to market with a substantial, reliable output that is competitively priced to be more affordable than conventional energy sources, while producing no pollution, and being ready for rapid deployment through the setting up of licensees worldwide.

I was very impressed with the personnel involved in the S. African company. So many great technologies over the years have been hindered primarily by unworkable inventors or teams that can't work well together.

What I Saw

What I witnessed, along with three other scientists that I brought along -- all more qualified than myself -- was a 5 kW unit powered by four batteries, running for three hours continuous, driving a load of approximately 4 KW. According to the amp-hour rating of those batteries (102 Ah each), without being recharged from an external source, they should have lasted only 35 minutes before running down completely, no longer able to power the system.

The load was roughly 4 kW, comprised of:

- a two-burner stove, each burner consuming 1 kW (rated power according to manufacturer)
- a toaster that consumed 850 Watts (rated power)
- a pancake maker that consumes 1 kW (rated power)
- A 40-Watt fan (rated power) 

The total output was as high as 5 kW, as long as the generator was turned at 3000 rpm, and there was sufficient load. (The generator only produces as much power as is used). One time we plugged in more load than 5 kW and it caused the system to shut down, as it should in that circumstance.

The system was comprised of a series-wound, brushed, DC motor (slightly modified) powered by one bank of two 12-Volt, deep-cycle batteries (102 Ah) wired in series for a 24-Volt output. The company says the back-EMF is harvested into a second, identical battery bank, which is also wired in series. These two banks are periodically cycled, trading places in the circuit, and the net charge stays essentially the same, across both banks. The optimized cycling of power and storing of the back-EMF are all controlled by a proprietary circuit board and software developed by the inventor. The motor shaft is connected directly to the shaft of the AC generator, which spins at 3,000 rpm to produce 5 kW of power at 50 Hz, 220-V.

There was no external power cord or fuel going to the system. They lifted the table on which the system was housed, to show that no cords were run through the legs into the floor to a hidden power source. It is a closed system as far as physical devices are concerned.

We didn't have a way to detect whether or not electromagnetic radiation might be in use to power the system inductively or wirelessly; but we did see all around the room as we entered through the first floor underneath the lab, and we could see what was on the other side of three of the four walls, and we could see the roof as we approached the building, which didn't have anything on top of it. The unit was in the middle of the room, maybe 15 feet away from the fourth wall that we didn't look on the other side of.

Data

Here is the data we collected from the third test we ran:

Time	Bank 1 Volts	Bank 2 Volts	Frequency
"before"	24.82 V	24.27 V (.67?)	n.a.
11:52 am	24.82 V	23.82 V	---
11:58 am	24.82 V	23.75 V	49.87 Hz
12:07 pm	24.82 V	23.67 V	50.03 Hz
12:20 pm	24.82 V	23.66 V	50.02 Hz
12:33 pm	24.82 V	23.62 V	49.99 Hz
(lunch)	...	...	...
2:50 pm	24.82 V	23.08 V	50.03 Hz

The starting voltages of the individual batteries were less than 100% charged: Bank 1: 12.4, 12.43; Bank 2: 12.25, 12.42. We did not take an end point reading for the individual batteries (sorry for the oversight). At the time, I was thinking we would be back again.

According to these data, it looks like Bank 1 was not harnessed, and that Bank 2 was the only one being drawn from. Also, one of the two batteries in Bank 2 was not full at the start, but was discharged between 20-40 percent. With Lead Acid batteries, most of the discharge takes place during the first 1-V drop. At the end of three hours, Bank 2 was down nearly half a volt per 12-V battery (averaging), so it was somewhere between 50-70% discharged (assuming a fully charged battery starts at 12.6-12.9 VDC).

That analysis was made in hindsight, a few days later.

The company states: "The system is configured to swap between battery banks when the driving bank has depreciated by 8 percent, as can be seen from the tests, the driving bank dropped by only 4.9 percent."

I look forward to being able to see accurate data collected over a long period of time, showing individual battery voltages, current, and output energy readings accurately recorded as well.

But I will maintain that while our 3-hour run could have been more rigorously recorded, the basic principle does hold up: The system ran many times longer than the amp-hour rating of the batteries would account for if they were the sole source of power. Energy was showing up from somewhere else, or being transformed in some new way.

From an energy conservation frame of reference, modern science would predict that the batteries would do nothing but diminish. But there is something about this configuration that apparently allows ubiquitous, inexhaustible free energy "from the wheel work of nature", as Telsa called it, to be harvested. So the batteries did not drain nearly as fast, even though the system was producing significant excess power.

The claim/objective is that when working as designed, the system will be able to run continuously -- for years -- without the batteries dropping below a certain level (e.g. below 70% fully charged). From what I saw, I would say that they are on their way to meeting that objective, but they are not consistently there yet.

Began with a Failed Demonstration

The above description was the second test that was done for us on that set-up. The first run didn't turn out as planned.

The batteries diminished, the motor/generator slowed, and after 38 minutes it stopped running. Note that according to lead acid battery specs, these batteries were nearly fully discharged at the start of the test. I don't know that the S. African group understood or appreciated this attribute of batteries -- that it is not a linear relationship of voltage to power capacity.



Here are the data from that run: 

Time	Bank 1 Volts	Bank 2 Volts	Frequency
10:40 (no load/start)	22.50 V	22.40 V	n.a.
10:41	22.57 V	17.51 V	--
10:44	22.64 V	14.98 V	--
10:47	22.73 V	11.17 V	--
11:05 (it switched)	13.14 V	12.04 V	--
11:09	12.67 V	11.37 V	--
11:17	11.62 V	10.50 V	40 Hz
Stopped after 38 minutes
No load	17.12 V	14.58 V	n.a.

You can imagine the feelings of "Oh no; another dud!" that I was fighting as we watched this. But I should say that I was hopeful that the problem, whatever it was, would be identified and resolved.

It turns out that the previous test they had run had been for a client that had requested a control run that entailed running the system without the inventor's circuit, to see how long the system would go until it stopped. This damaged two of the batteries. Running lead acid batteries to zero is not good for them. Also, not all the batteries were fully charged at the beginning.

They replaced those batteries (including with one that wasn't fully charged) and then ran the test again, which gave the results I reported earlier.

40 kW Array

They also ran a 40 kW system for us that was set up the same way except with a DC motor suitable to turn a 40 kW generator; and 16 batteries, comprised of 4 sets of batteries in parallel in place of a single set of batteries in the 5 kW set-up.

It wasn't set up at the time for extended running, so we only saw that one run for about 10 minutes. It wasn't wired to the load bank (a ~$10,000+ piece of equipment with resistive coils), and the shaft connection wasn't properly aligned. It was running without a load.

The other prototype size outputs apparently are available at their manufacturing facility. They include:

1.     5.5 kW single phase

2.     8 kW single phase

3.     12 kW 3 phase

4.     16 kW 3 phase

5.     40 kW 3 phase

6.     42 kW 3 phase

Other Scientists that Accompanied Me

The three other scientists that came with me to this demonstration were Johan, Keith, and Henry, all from Johannesburg.

Keith is an electronics technician with many years’ experience in all kinds of gadgets. He wrote:

"I felt privileged to witness the future in person. I may be just a certificated electronics technician, but with more than 40 years field experience, I know enough to know that what I witnessed is no scam. I'm not sure how this process actually works, but it is most definitely working. It's one thing to read about things like this, and most reports are 'iffy' to say the least. To witness this in person and see that no extra power was being added, and the unit keeps on going way beyond what the batteries are capable of delivering, is completely mind blowing. The hairs on the back of my neck are still tingling! Thank you so much for arranging for me to witness this!"

Keith's friend, Henry has a degree in electrical engineering with 25 years’ experience in industrial electronic design, his specialty being electric motors and generators. He was primarily the one making measurements, asking questions, making observations, and, along with the rest of us, grinning at the end of the day. To be fully satisfied, he would like to see a longer run, with more careful measurement of the input and output, but he thought the device definitely looked promising.

The South African Team

As mentioned above, I was highly impressed with the South African company's team.

The inventor is actually very socially functional and not so eccentric he is impossible to work with -- a phenomenon I've seen far too many times over the years. Some of the best technologies are opposed the most by the inventor's inability to interact with those who seek to help.

The inventor has been successful as a technologist and manager for a large company. He's not the archetypal outcast of the fringe, as is often found in the free energy sector.

He came up with this invention in a round-about way, not starting out with a particular vision in mind. He was just tinkering, building a toy for his daughter, making one modification after another, tweaking, optimizing, until he ended up with design that powered his house for three weeks, which was when he brought it to a financier, who then powered his office with it for three weeks.

The company is privately funded, so they are not looking for investment.

They also have a lot of patriotism toward S. Africa. They are proud of the many milestone accomplishments of the country, and seem intent on having S. Africa be honored once again by being the birthplace of this technology.

They hope to get the distinction of bringing the first exotic free energy technology (of the home-power electricity variety) to the marketplace; and to be able to leverage the branding opportunities that will be associated with that. And after they have successfully launched the 5 kW FFG into the market, they would like to expand into a role of helping to incubate new breakthrough energy technologies -- to become the Siemens of Free Energy or of affordable distributed power.

No Photos

One point of frustration for me was that I wasn't permitted to take any photos of any of the devices. Their reason wasn't for protection of proprietary information, because a photo wouldn't divulge such. Rather, their reason had to do with image. They want the first images the public sees to be professionally done, in order to present a good first impression.

I disagree. I think their set-up looked fine. Compared to most of what I'm used to seeing in this sector, their equipment looked great, especially their 40 kW system.

Plans for Roll-out

The company plans to focus at first on producing the 5 kW system. They have several customers lined up, including some multi-national companies with strong name recognition, who will be testing their first 200 units built, set to begin in March. They will continue to produce 200 units/month for the S. African market, increasing this to 500/month by the end of the year.

They showed us a cabinet with 200 circuits they have prepared to go into those first 200 units. The 5 kW system we were observing was actually a test system to make sure each of those circuits has been built properly.

After the customers have run those first units for thirty days, 1) they will purchase them if they are satisfied with their performance, and 2) they will publish a report of the performance of these devices, to be included in their promotional material, both for potential licensees (more detailed) and for the public (simplified).

If the outcomes of those tests are sufficiently positive, then the company will do a big press conference or launch event to announce the product to the world.

After the 5 kW system is proven, then the company will next focus on rolling out larger sizes.

Skipping Alpha Testing

This method of having the first customers be the ones to test the first manufactured units is not the way a product is normally rolled out commercially. Usually, the first testing of the device intended for market is done in-house (alpha testing). Only after thousands of hours of testing and receiving certifications, followed by extensive beta testing (by external parties in real-world environments) would the product be introduced to customers. Alpha testing would include stress tests under varying situations including heat, cold, vibration, running to destruction, determining optimums and margins; as well as toxicity and interference tests to show the device operation doesn't impact human health or electronics.

However, remember that this FFG system uses primarily off-the-shelf components that have already been run through the rigors of such tests.

The alternator, for example, will already have such testing, certifications, and approvals. As long as it is being turned at its rated speed, it will produce its rated output, whether the source of the rotating torque is hydro, wind, diesel generator, etc. A home warranty or insurance adjuster should only be concerned with the output of the alternator, which has the necessary credentials. So (I would think) the classification of this unit would be in the same group as a genset, which already has the needed UL or CE ratings.

Customers can buy off-the-shelf grid-tie systems that will sync the generator up with the local grid power, with automatic shut-off, in the case of a grid power failure, so that linemen are not jeopardized by the power coming from the device. A grid tie would be best, since the unit can puts out a constant 5 kW, and with net metering, most homes would come out well ahead at the end of the month; thus speeding up the payback time, in those states where net metering allows for payback for net excess energy generation from the customer's side.

What does this do to the Batteries?

One downside to minimizing a rigorous alpha-testing approach, as I see it, is that the company has not yet been able to study long-term performance results for the system.

The longest it has been run in one setting has been three weeks: once when powering the inventor's home; and once when powering the financier's office -- both for three weeks.

Alex Xanthoulis, CEO of Defkalion, said that he saw a system similar to this 1.5 years ago at a university in Greece. It worked short-term, but it hammered the batteries, so they only lasted a few days. Since the South African company has far exceeded that, it is probably safe to say that their circuitry is different, and doesn't have as much, if any, of a detrimental effect on the batteries.

Licensing Opportunity

The South African company plans to have each country have their own manufacturing and distribution network, rather than have one primary manufacturer.

The licensee task will entail sourcing the off-the-shelf batteries, DC motor and AC generator (or other end applications for capturing that power from the DC motor shaft, such as a pump); manufacturing the cabinet to house the system; assembling the systems, and distributing them to customers; and servicing the customers.

However, one very important point is that in every case, the licensee will purchase the control system for each unit from the S. African company. That is both to protect the intellectual property and to provide a built-in way for them to get a royalty on each unit sold.

The up-front licensing fee is likely to be low, like a deposit or earnest payment on a property offer. The main revenue for the S. African company will be from sales of the control circuit, which only they will manufacture, containing the proprietary elements.

Potential Licensee Attributes

Usually, when a company talks about licensing a technology, they have all the alpha and beta testing done, with reams of data and spec sheets about the device(s) to be licensed.

In the case of the S. African company, though, potential groups coming in now to license will be early players, and will need to have a different threshold of willingness to assume risk, withstand skepticism, work through bugs, etc.

Potential licensees will need to be able to provide evidence of their capability to perform functions such as:

• Financial means to capitalize the project (capital expenses will not be that high, compared to other energy device manufacturing scenarios).

• Ability to source the best, most affordable, reliable, compatible off-the-shelf components.

• Ability to run installation, maintenance, repair, and other support services.

• Ability to properly market the device.

• Proper motivation: humanitarian, not greed-based.

• Ability to put up with and overcome skepticism, criticism, rudeness, and even overt suppression tactics.

Metamorphosis Rather than Usurpation

The arising of this and other exotic free energy technologies that are both clean and have the potential to render obsolete many energy modalities, might not go over well with those that are already involved in those sectors.

The S. African company hopes to make this transition as minimally disruptive as possible, while still addressing the planet's need for affordable, clean, distributed power, which empowers the individual while rendering obsolete the corrupt powers that be. Good riddance to the latter, but there are many sectors that aren't corrupt which could also be negatively impacted.

In order to minimize this collateral damage, the S. African company will seek to work with those companies to let them be part of this opportunity, rather than be put out of business by it.

Postscript

Just a quick note on the side.

Thanks again for the donations that made all this trip and more possible. You people are awesome. Not one person who donated asked for their money back, even though there was a lot of criticism about how long it took me to get this report up. I will gladly refund any such requests. I promise to put those funds to good use.

I've put this technology up in #1 position in our Top 5, but I should say that they are neck-in-neck with Defkalion. It's close to a tie for first, being very close in terms of price point, closeness to market, quality of team, cleanness of product.

For you naysayers who immediately jump to the conclusion that anything involving "free energy" must be bogus or fraudulent, bear in mind that this company is not seeking money. In fact they spurn any such inquiries.


p.p.s. Whoa...

The company sent the following on February 22, 2012 3:48 PM [MST], about 6 hours after we first posted the above story:

I appreciate your enthusiasm but need to pull the reins back a bit. I mentioned when you were here that we first want to trial with the corporates [the companies they have in line presently]. This process needs to go ahead now and we will entertain licensees thereafter so let's hold off on the discussions with potential guys for now as we are being flooded and I don't want to distract from our strategy.....

And on February 28, 2012 12:45 AM [MST], in response to my email titled "how do I keep up?", describing how difficult it has been for me to stay on top of the flood of emails I've been receiving, they wrote:

"Awesome... now imagine if we had launched it yet officially, you will have to have a large staff complement just to answer them. I think we should tell the guys to hold off for now as the flood gates have opened for product that we are still testing and have not commercialized yet. We will not adopt a first come first serve mentality...

"We have started our own internal alpha testing as such, to get the certification process going. So we will be going for some destructive testing processes as well before we actually go into beta. This process will take some time, so we have delayed the project slightly, as we feel that some proper data might help our cause first."

 

What You Can Do

 

 

1.     Pass this on to your friends and favorite news sources.

2.     http://finance.groups.yahoo.com/group/FFG_news/join - newsletter for keeping updated on major developments. Or you can subscribe by sending an email to: FFG_news-subscribe@yahoogroups.com then respond to the confirmation email. (Commenced February 28, 2012)

3.     Click to tweet: http://clicktotweet.com/VwzdW 

4.     If you are an early adopter and entrepreneur, consider licensing the technology for your region of the planet. You can contact them through me. Please briefly describe your abilities and intentions.

5.     Unless you live in S. Africa, you can't order a unit until there is a licensee set up for manufacturing and distribution in your region.

6.     Donate to PES Network to help us keep this news and directory and networking service going.

7.     Subscribe to our newsletter to stay abreast of the latest, greatest developments in the free energy sector.

8.     The company is not looking for investment.

 Before I left, many people were concerned for my safety, wondering which direction from the airport I would be going in Johannesburg. I think you can see from these photos of my hotel room that they took very good care of me, as we were in an affluent, safe part of town. I only took 17 photos, total, while in Johannesburg, so obviously I wasn't in "tourist" mode. It was all business, and very enjoyable for me. (That last image is a glass sink.)

From Pure Energy Systems News @ http://pesn.com/2012/02/22/9602042_South_African_Fuel-Free_Generator_Preparing_for_Market/

Update from the S. African Company

Now, finally, for those of you who have been anxious to get an update, I have been given permission to post the following statement from the company, which may be the last before they make their big splash to the mainstream news.
Wednesday, March 14, 2012 10:55 PM [MDT]
(slightly edited)


Hi Sterling

You may write that the units will be produced once we have received our shipment of alternators and dc motors. The electronic circuit boards are ready and have been tested for the 200 units. We have started alpha testing and noticed that not all motors are equal. We have thus had to change dc motor suppliers, and hence the delay.

I think it is better to be cautious and prudent when launching a product than to create the hype around it first. We did not wish to publicize the fact that there were 200 units coming out as these were not meant for commercial release. These will be for alpha testing and have already been assigned to testers.

Naturally, with releasing information, one has to be careful not to compromise on any commercial discussions. As such we will not be releasing any other or further information.

Please let your readers know that they should be looking at the mainstream media for word from us now. The reasons many inventions of this nature fail is also due to the fact that it is seen as fringe science touted by fringe media. An invention of this nature will be in the mainstream media when it is released.

We have been waiting for something like this for at least a century now, we can wait a little longer, I think.

For the detractors in your comment field: Get off your butts and go invent something instead of slagging off on anyone who is attempting to free you from your slavery to fossil fuels, or perhaps you represent the industry?

By way of clarification, I should point out that our mention of 200 units in our last story was reviewed and approved by them. I supposed that the above statement "we did not wish to publicize the fact that there were 200 units coming out" is more a retrospective wish.

From http://pesn.com/2012/03/16/9602059_Final_Update_on_South_African_Fuel-Free_Generator_Before/




For more information about free energy technologies and concepts see http://nexusilluminati.blogspot.com.au/search/label/free%20energy

Please Help Keep This Unique Site Online

Donate any amount and receive at least one New Illuminati eBook!

Video @ http://www.youtube.com/watch?feature=player_embedded&v=Jutim7ZMofw

Images – http://earthobservatory.nasa.gov/Features/CitiesAtNight/images/ISS007-E-16525_night.jpg

For further enlightening information enter a word or phrase into the search box @  New Illuminati or click on any label/tag at the bottom of the page @  http://nexusilluminati.blogspot.com

And see

 New Illuminati – http://nexusilluminati.blogspot.com

 New Illuminati on Facebook - https://www.facebook.com/the.new.illuminati

New Illuminati Youtube Channel - http://www.youtube.com/user/newilluminati/feed

The Her(m)etic Hermit - http://hermetic.blog.com

The Prince of Centraxis – http://centraxis.blogspot.com

This material is published under Creative Commons Fair Use Copyright (unless an individual item is declared otherwise by copyright holder) – reproduction for non-profit use is permitted & encouraged, if you give attribution to the work & author - and please include a (preferably active) link to the original along with this notice. Feel free to make non-commercial hard (printed) or software copies or mirror sites - you never know how long something will stay glued to the web – but remember attribution! If you like what you see, please send a tiny donation or leave a comment – and thanks for reading this far…

From the New Illuminati – http://nexusilluminati.blogspot.com