Cold Fusion (LENR) is widely replicated and the answer to our prayers
E-Cat household fusion may be in Home Depot in 2012
Artist's concept of a home E-Cat unit, via
The E-Cat cold fusion power generator reportedly ran for 5.5 hours, producing about 470 kilowatts of electricity. It was supposed to output one megawatt, but some "technical issue" prevented full power operation. Well, fine, okay, that's still 470 kilowatts of power from effectively nothing, so not bad, right?...
But whether we believe it or not, household systems reportedly may be available in Home Depot later this year.
According to the rather secretive people behind the Energy Catalyzer (or E-Cat), the breadbox-sized device uses a jump start of electricity to begin combining hydrogen with nickel via a special catalyst to generate heat. It doesn't emit any carbon and isn't radioactive, but it has about the same power density as a uranium fission reactor core. And since we have lots of hydrogen and nickel here on Earth, the E-Cat is exceptionally cheap to operate.
Last we heard, a large-scale E-Cat test back in October was declared a success despite some questionable circumstances. This technology is in no way proven (at least, not to the satisfaction of most people who expect things like unrestricted independent scientific evaluations), but E-Cat is confident enough to be in talks with Home Depot for the distribution of residential E-Cat systems in the U.S.
If this happens, sometime this autumn you'll be able to order a home E-Cat system for somewhere between $1,000 and $1,500. It'll be easy to install (your contractor can do it), and it'll take over all of your household thermal (water and air heating) and air conditioning demands. The E-Cat should pay for itself in "a few months" (depending on your existing energy usage and rates), and after that it'll run for another 30 years for free.
Again, this would be totally awesome if it happens. If the E-Cat is everything it claims to be, it has the potential to revolutionize the energy industry. But it's awfully strange that the people behind E-Cat have been so reticent to allow comprehensive scientific testing, and usually what that means is that there's something fishy going on. Not always, but usually. We definitely don't want to dismiss this, but either way, we'll be looking forward to seeing E-Cats in action (or not) later this year.
Via dvice @ http://dvice.com/archives/2011/10/e-cat-consumer.php & http://dvice.com/archives/2012/01/e-cat-household.php
E-Cat Energy Plant in operation, image via 22 Steps of Love
Cold Fusion (LENR) is widely replicated and the answer to our prayers
by
I would dismiss him myself if I did know that hundreds of other researchers have seen similar effects thousands of times. I myself have spent weeks in laboratories watching cold fusion gadgets produce heat. It is boring after a while.
Knowing that the effect has been widely replicated in hundreds of major laboratories puts everything in a different perspective. It makes Rossi far more believable. Believability in experimental physics is predicated on two things: independent replication and a high signal to noise ratio. Cold fusion met these goals back in 1990. There is not a single rational reason to doubt it exists.
The thing is, most reporters and scientists, and people such as Glen Doty know nothing at all about cold fusion. They do not realize it exists. They have not read any papers on the subject. So naturally they say “I’m confident that this is a fraud…” In 1906, three years after Kitty Hawk and one year after the Wrights flew in front a large crowd of leading citizens of Dayton Ohio for 40 minutes, every single newspaper and magazine in the U.S. — especially Scientific American — denounced them as frauds, charlatans and lunatics. Not one of those newspapers bothered to send someone to Dayton to ask the bank president and others if they had really seen a flight.
The editors at Scientific American today are no smarter than their predecessors. They told me they have never read a paper on cold fusion “because reading papers is not our job” but they are sure it is fraud and lunacy. (I uploaded that letter.)
“The real question is not why is the mass media is ignoring Rossi, but why have they ignored the rest of cold fusion for 22 years? My answer: because they are stupid, and incurious.” – JedRothwell, May 4, 2011
This bears repeating: “Knowing that the effect has been widely replicated in hundreds of major laboratories puts everything in a different perspective.”
To drive home the point: Ni+H(heated under pressure)=Cu+lots of heat. This phenomenon (LENR) has been confirmed in hundreds of published scientific papers: http://lenr-canr.org/acrobat/RothwellJtallyofcol.pdf
Here is a PowerPoint presentation by George Miley of the University of Illinois who has successfully replicated the LENR “cold fusion” reaction.
Knowing the LENR exothermic reaction has been widely replicated, you ought to assess how much energy we gain with this new clean energy technology. According to Rossi’s patient one gram of nickel ought to yield the energy equivalent of about 500 kilograms (not tons, which was a mistake) of oil. This means that nickel is about half a million times as energy dense as oil (or about one hundred thousand times as energy dense as diesel fuel) using LENR.
Nickel is about 3% of the mass of the Earth, whereas all fossil fuels combined (even oil sands and methane hydrate) are less than a billionth that amount.
Here is another gem internet comment:
“Ramifications
Scalable: Nuclear energy densities from µW to GW
Portable: Little or no need for radiation shielding
Adaptable to the full range of transportation systems
Does not have the weight, safety, and costs of fission
Revolutionizes Aviation and Access to Space
Decouples energetics from reaction mass
Fuel mass essentially goes away for air-breathing applications, reduces total mass
No GHG (CO2, H2O, aerosols, …) concerns
Fuel is very cheap (Nickel abundant, electrolysis of H2O)
Total replacement of fossil fuels for everything but synthetic organic chemistry” -Sept 22, 2011 LENR Brief @ GRC – J.M.Zawodny 27
Couldn’t have said it better myself. The paradigms are so broken man – maybe we can create paradise on Earth and settle the other planets of our solar system. Frankly, it seems like the main barrier to fast LENR integration is psychological.
From Cold Fusion Now @ http://coldfusionnow.wordpress.com/2011/12/11/lenr-is-widely-replicated-and-the-answer-to-our-prayers/
Swedish Skeptics Confirm "Nuclear Process" in Tiny 4.7 kW Reactor
I spend much of my time debunking the free energy fantasies of my less technically competent friends. Wishful thinking makes many believe that cars can run on water after seeing a brief youtube video. Lately, however, I have been undergoing an exciting paradigm shift.
You probably think that 4700 watts of clean, radiation-free power from a three cubic inch reactor sounds like yet another impossible hoax. But this was a third iteration demo, designed to satisfy skeptics of two previous demonstration at the prestigious University of Bologna. Attending the third demo were two Swedish scientists. One was chairman of the Swedish Skeptics Society and the other was chairman of the Energy Committee of the Swedish Royal Academy of Science. They were both allowed to freely examine the entire setup except for the contents of the tiny, 50cc reactor chamber.
Their written report ended with: “Any chemical process for producing 25 kWh from any fuel in a 50 cm3 container can be ruled out. The only alternative explanation is that there is some kind of a nuclear process that gives rise to the measured energy production.” They also noted that you would have to burn 3 liters of oil to produce 25 kWh. There has since been another confirmation.
The inventor, Adrian Rossi, is very accessible on his blog and has said that more than one hundred of his 4.4 kW reactors are running in four countries. He plans to ship a larger unit in October that produces one MW of hot water. It consists of hundreds of the small reactors in series/parallel mounted in one 2 X 3 X 3 meter box. It weighs two tons. The proprietary nanopowdered nickel fuel will be replenished every six months. Everything has been financed using Rossi’s own money and the customer will pay only when satisfied.
Rossi is an inventor and businessman who decades ago noticed excess heat effects while working with a nickel catalyst to synthesize fuel from hydrogen and carbon monoxide. Using Edison-like experimental techniques, he soon learned to control the heat production. He even kept his factory heated for two years with a prototype reactor. More than two thousand prototypes were built and destroyed in refining the design and learning how to control and scale up the reaction.
Researching the science literature, Rossi soon found Dr Sergio Focardi of the University of Bologna, who had regularly published work on nickel-hydrogen reactors since 1994. Using his own money, Rossi contracted with Dr. Focardi and the university to help him understand and develop the technology as a product. By January 14, 2011 they were ready for a public demonstration of a 10 kilowatt desktop reactor.
The press reaction was muted in Europe and nonexistent in the U.S. Skeptics accused him of hiding a battery inside the reactor so another, longer, demonstration was held, using calorimetry that heated but didn’t boil water to answer other critics. The 18 hour demonstration produced 18 kilowatts average over the entire 18 hours. The U.S. press was still silent and skeptics were still suspicious so two more demos were held.
Still, the silence from the U.S. media was deafening. Rossi announced that there will be no more demonstrations until October 2011, when the million watt heating plant will be shipped to a customer in Greece. If he succeeds, be prepared for a repeat of the Sputnik shock of 1957 when the US woke up to find that they had fallen way behind in science.
Nickel is plentiful and cheap and so is hydrogen in the tiny amounts used. Nickel is so plentiful that energy becomes virtually free. Rossi’s reactor is very simple in principle. Powdered nickel and a catalyst are simply heated to about six hundred degrees centigrade in a stainless steel chamber filled with pressurized hydrogen. At a certain point, the gradual heating starts accelerating due to nuclear reactions in the metal lattice. The heating resistor is backed off to keep the reaction going at a steady state, with about 15 times more heat output than input. Much higher ratios are possible but can be unstable and dangerous. This is why the 1-MW plant will be built using hundreds of smaller modules.
The reactor is enclosed in a lead shield because some radiation is, unpredictably, produced during operation. However, the spent fuel is not radioactive but contains copper that has transmuted from nickel in the nuclear reaction. The lack of dangerous radiation drives hot fusion experts crazy, but clearly there are things happening that are not covered by the equations used in hot fusion. Obviously, quantum mechanics needs to be rethought to include these reactions.
There are many proposed theories. Biological processes have been found to produce transmuted isotopes without radiation. Also, tritium sometimes comes out of volcanic vents from unknown reactions inside the earth. Clearly, the physicists have more to explain if they will just open their ears. Here is an equation they should study carefully:
Groupthink + Denial = Environmental Disaster + Expensive Energy + Wars
Groupthink can make us totally irrational. The dot-com bubble and the housing bubble are examples of renowned experts becoming completely blind to facts that are now obvious in hindsight. Making a lot of money tends to blind us poor humans to clear evidence that we are living in a fantasy world. The consequences can be terrible.
Nuclear physicists in 1989 were riding a bonanza of tens of billions in government research money for the development of hot fusion reactors. After several decades of hard work, they were still far from achieving break-even, where output energy exceeds input energy. Just as the next round of appropriations was assured, Fleischmann and Pons came along with the announcement that they had already achieved excess heat output without government support and on an inexpensive desktop setup.
Denial was immediate. MIT and Caltech, who had been leaders in hot fusion work, immediately went to work “trying” to replicate the experiment. In just five weeks Caltech announced negative results. At a May 1st 1989 APS meeting in Baltimore, two thousand physicists gave a standing ovation to the Caltech team’s presentation. A lynch mob mentality, combined with denial, turned the exciting discovery of cold fusion into an enemy.
MIT helped set the tone by arranging a front page story in the Boston Herald on the day of the meeting with the headline, “MIT bombshell knocks fusion “breakthrough” cold.” The story was an interview with leaders of the MIT fusion lab that accused Fleischmann and Pons of fraud. The charge was later denied but tapes of the actual interview confirm what was said.
MIT further disgraced itself by altering data in its failure to replicate study. This was discovered two years later by MIT employee Eugene Mallove, who found copies of the July 10 and July 13 drafts of the paper. The July 10th version had a graph that clearly showed excess heat. In the July 13 version the graph was redrawn to show no excess heat. The atmosphere at MIT, as shown by a “Wake for Cold Fusion” party (before the data was analyzed) and t-shirts and mugs offered by the plasma fusion lab, was hardly impartial.
To this day, denial reigns among most of the guilty parties of this travesty. The Department of Energy, Nature magazine, Scientific American, the American Physical Society, the U.S. Patent Office and many of the world’s top physicists still cling irrationally to the belief that cold fusion is junk science. Of course, this is how denial works: We protect our belief system by quietly stepping around the “elephant under the rug.” As long as a majority of our group backs us up, our view of reality remains grossly distorted to preserve the group-think consensus. Global warming deniers do this every day.
The Fleischmann-Pons announcement should have been the start of a new era of cheap, clean energy that would have saved us from the financial and environmental disasters and wars caused by fossil fuel energy. Instead, denial and dirty tricks caused us to waste 23 years and tens of billions of dollars on failed nuclear projects as though nothing had happened. The Presidents 2012 budget includes $2.5 billion for such projects. The first DEMO hot fusion plant is currently scheduled for 2033.
A surprising natural process was discovered in 1989 that can provide us with clean, essentially free energy. It clearly conflicts with the current consensus understanding of quantum mechanics that works nicely for hot fusion reactions. It seems reasonable to try to improve the theory to accommodate this new reality, but denial has instead tricked many good scientists to try to “shoot the messenger.”
The time has come to admit the mistake and get busy trying to improve our understanding so that we can perfect this amazing new technology. We have spent $20 billion and 55 years trying to reach break-even with hot fusion. Time to give cold fusion a chance.
There have been many painful scientific battles in the past over paradigm changes, but truth has a way of prevailing eventually. Cold fusion work has continued under the radar using the more accurate term “Low Energy Nuclear Reactions” (LENR.) Shunned by the establishment, supporters of LENR have created their own journals and meetings. Much progress has been made.
The reasons for the initial difficulty in replication of excess heat have been identified and the amount of excess heat has increased. By 1995 there were 21 published replications showing excess heat of up to 205 watts. Strangely, the press lost interest after the initial media circus. The media’s face-saving denial has left most people with the impression that cold fusion is still dead. In 2009, 60 Minutes broke the silence and did an excellent update. But the rest of the media simply ignored it and focused instead on less risky reports on newsworthy items like rising gasoline prices.
Annual conferences have continued. A weeklong working demo of LENR was included at the tenth ICCF conference, which was held in 2003 at MIT. The power output was 2.3 times the power in. The most recent meeting was held in San Francisco in 2011 under the auspices of the American Chemical Society. The number of presenters at this meeting have quadrupled since 2007. The results this year were so enthusiastic that the American Institute of Physics refused to publish the 370 page proceedings. The cancellation of the publication contract was a last minute decision, clearly ordered by someone at a high level. This attempted blackout of a new technology will backfire in the long run as results get stronger and stronger.
By using nickel and ordinary hydrogen, several researchers have significantly increased energy output and reduced costs. In 1992, Thermacore, a U.S. military contractor ran a cell for nearly a year with a 50 Watt output and 3X excess energy. In 1996 Dr. Sergio Focardi of the University of Bologna in Italy described an experiment using nickel & hydrogen that produced an average excess power output of 39 watts continuously for 278 days. There are a dozen competing theories to explain how nuclear reactions can produce so much energy without emitting dangerous radiation. Theories are helpful but not necessary. We still don’t really know how permanent magnets work, yet we use them every day. Practical applications can be developed experimentally, just as Edison developed the light bulb.
Now that Rossi and Focardi have shown what can be done, expect to see a flurry of new announcements. New technologies tend to take forever to totally debug, so it won’t be surprising if the October delivery is delayed. There are several other companies such as Lattice Energy LLC, Blacklight Power, Brillouin Energy, and Energetics, who have announced product plans to the press and then gone silent.
Silence is not necessarily a bad sign, as the Bloom Box demonstrated. My bet is that we will have some amazing surprises within a year that will be a wake-up call, just as Russia’s Sputnik launch was in 1954. This moment could have come ten years ago if only we had listened to Fleishman and Pons in 1989.
Some excellent videos to watch: 60 Minutes, one hour movie.
From Renewable Energy World @ http://www.renewableenergyworld.com/rea/blog/post/2011/05/swedish-skeptics-confirm-nuclear-process-in-tiny-4-7-kw-reactor
Andrea Rossi interview on Ca$h Flow: “What you call pressure, I translate as responsibility.”
byJanuary 2, 2012
Not afraid to enter a specialty that kills careers, Mr. Rossi says, “To work in this field you have to be absolutely non-reactive towards controversy.”
The reason he had success, out of thousands of attempts, was because “we did not lose our time in controversy. We just let everybody say what they wanted.”
James Martinez interviewed Andrea A. Rossi on his Ca$h Flow show this past Thursday, December 29. You can download an .mp3 of the hour-long conversation directly from Cold Fusion Now here, or, go to the Achieve Radio Ca$h Flow archives here.
James has conducted interviews with a long list of new-energy researchers and presented to the public a catalog of scientist’s voices in their own words which you can access from the Cold Fusion Now audio page. In the recent interview with Andrea Rossi, James touched on a number of topics including how Mr. Rossi first got into energy research, the politics of cold fusion and the economics of his new technology.
Paying respect to Drs. Fleischmann and Pons, Mr. Rossi said it was the announcement of their discovery in 1989 that was the “spark that ignited the fire”.
Despite the thousands of early experiments with null results, Mr. Rossi was convinced that he would eventually achieve his goal. “Something like instinct” brought him success.
Along with Sergio Focardi and his team, they focused on the real practical undertaking “to make apparatus’ that work”.
“This is the only thing that counts. I absolutely do not care about all the meaningless noise that surrounds this kind of work.”
Mr. Rossi responded to a question about home units saying distribution to the public of household units is expected to begin “in autumn of 2012” adding that “We are in talks with Home Depot for the diffusion”.
“We have already started the sales of the industrial plants of 1MW, but now focusing on the household, we have to resolve the issue of certifications, and we are working on those, and we are organizing the production.
The target price will be between $1000-$1500 US for an E-Cat with a power between 10-20 kilowatts. Such an E-Cat is able to give the thermal energy and air conditioning for an average family house.
With this price, in a few months the E-Cat is paid back, and the expected life of an E-Cat is around 30 years.”
He believes that his team will be able to start production with one million units “in 2012 with the help of God.”
“Until now we have worked to make the technology. Now we have to make the production. Up to now, we have been able to do all we said that we would have done, and I hope that it will be so for this.”
These first E-Cats “will be made in a way that it will be possible to retro-fit them continuously with all the new arrivals of technology.”
When James asked Mr. Rossi if these home units would be easy to install, he outlined the plans for a network of installation specialists.
“The device has been designed to be very simple to install. It can be installed in parallel with existing heating systems, if they already exist. We will have our network that will go to install but to enrich our network, we will use this system: when anybody will buy an E-Cat we will ask him to communicate to us the address of his contractor who already works to maintain his house.
At that point we will contact immediately his contractor, give him the necessary instructions and send him to make the installation and at that point he also will become, if he wants, a contractor with our network.
This will be the system that we will use. If he will refuse to do this, we’ll send somebody else. But first of all, we will try to enrich and give work to the people that are already in place.”
English is not Mr. Rossi’s first language, and these excerpts are written in the spirit of his meaning. He gave James Martinez a generous interview with alot more exclusive info, but we won’t spoil the listening experience for you!
Download the .mp3 and hear the inventor of the next revolution in clean, abundant, affordable energy in his own words.
“The most important thing that can be learned from the work that we are doing is that we will overcome any critical moment, so in this difficult moment for everybody, if anybody works, believing in what he does, and works with all his efforts, we can build up a new, strong economy.”
Cold Fusion Now!
From Cold Fusion Now @ http://coldfusionnow.wordpress.com/2012/01/02/andrea-rossi-interview-on-cah-flow-i-translate-pressure-as-responsibility/
For more information on LENR/Cold Fusion see http://nexusilluminati.blogspot.com/search/label/cold%20fusion
For further enlightening information enter a word or phrase into the search box @ New Illuminati or click on any label/tag at the bottom of the page @ http://nexusilluminati.blogspot.com
And see
The Her(m)etic Hermit - http://hermetic.blog.com
New Illuminati – http://nexusilluminati.blogspot.com
New Illuminati on Facebook - http://www.facebook.com/pages/New-Illuminati/320674219559
This material is published under Creative Commons Fair Use Copyright (unless an individual item is declared otherwise by copyright holder) – reproduction for non-profit use is permitted & encouraged, if you give attribution to the work & author - and please include a (preferably active) link to the original along with this notice. Feel free to make non-commercial hard (printed) or software copies or mirror sites - you never know how long something will stay glued to the web – but remember attribution! If you like what you see, please send a tiny donation or leave a comment – and thanks for reading this far…
From the New Illuminati – http://nexusilluminati.blogspot.com
Very interesting, I wonder what exactly the catalyst is?
ReplyDelete"It has the potential to revolutionize the energy industry" - I don't want to sound pessimistic but that makes me doubt that we'll be seeing it for sale in the mainstream anytime soon!
Nano nickel! The main stream is actually a very narrow minded current, but it's still so broad that many 'free energy' systems are already operating beneath the surface, waiting to be recognised.
ReplyDeleteNeed for Speed Heat Download
ReplyDeleteiCloud Crack
CorelDRAW Graphics Suite Crack
Windows 8.1 Activator
Redream Crack
Korean Comedy Movies
Full body massage bayside
Спасибо, ребята ! Интересно было вспомнить увлечения моей молодости.... Желаю вам успехов!
ReplyDelete